Reversing cold mills

Cold rolling
Flexible production, high capacity, top versatility

Are you ready for an annual production of 100,000 to 500,000 tons? Then our single-stand reversing mill (RCM) is ideal for you because it offers you a very broad product spectrum. It's the best solution for rolling silicon steels and special steel grades. What makes the mill so efficient is that you can set the number of passes and the rolling speeds to suit your program. Also included in our range is our twin-stand Compact Cold Mill (CCM®) for capacities of up to 900,000 tpy, depending on your product mix. Furthermore, if you want to upgrade an existing RCM into a CCM®, our flexible extension package makes this possible - and affordable.


Design for a production of up to 500,000 tons per year

Single-stand reversing cold mill (RCM)

The RCM is the all-rounder among cold rolling mills. Mainly used for rolling low carbon steels, it's also a great solution for advanced grades such as silicon steels. And, if you want to produce small to medium batch sizes, this mill type is a highly efficient option. Depending on your product mix and the installed rolling technology, the capacity ranges from approx. 100,000 to 500,000 tpy.

Design for a production of up to 500,000 tons per year image

Design for a production of up to 900,000 ton per year

Twin-stand Compact Cold Mill (CCM®)

Our successful Compact Cold Mill (CCM®), a two-stand reversing type, represents the very best in SMS group design. Featuring a capacity of 500,000 to 900,000 tpy, the CCM® closes the gap between the single-stand RCM and the multistand tandem cold mill. We engineer these mills to achieve the best investment and lowest operating costs for their capacity range.

Design for a production of up to 900,000 ton per year image

Design for efficient production of high-strength and stainless steels

CVC® plus 18-HS mill

Some ten years ago, we developed our 18-HS mill design, which is available in combination with CVC® plus. This solution is ideal for rolling high-strength and stainless steels. It can be applied in reversing mills (RCM) as well as tandem mills (TCM).

Design for efficient production of high-strength and stainless steels image


Total roll gap control (TSC) image

Total roll gap control (TRC®)

Total roll gap control (TRC) - thread in and tail out assistant for lower off-gauge lengths and high yield.

Dry strip system (DS system) image

Dry strip system (DS system)

Excellent strip surface quality

SMSgroup Image

Superior design and actuators for roll gap setting

Outstanding CVC® plus 4-high and CVC® plus 6-high designs for better yield and quality, proven by more than 800 installed systems:

SIEFLEX HD - high capacity spindle image

SIEFLEX® HT - High-capacity spindle

High-strength materials require even heavier rolling torques and forces. To meet this challenge, you can now opt for our new ...

Multipurpose mill CVC plus M 18/4 image

Multipurpose mill CVC® plus M 18/4

Flexible production of soft and high-strength material in a single mill

X-Roll® Oil Bearing

Hydrodynamic roll-neck bearings from SMS group are highly advanced and elementary components of modern rolling mill technology. That's because they support the load-bearing backup rolls. Even under extremely tough operating conditions, they ensure long roll service life and minimal maintenance outlay. This is how roll-neck bearings contribute substantially to meeting the high requirements for optimal final strip geometry.

SMSgroup Image

Selected References

Electrical and automation systems





SMSgroup Schanderl, Jürgen

Jürgen Schanderl

SMS group GmbH
Technical Sales Reversing Cold Rolling Mills
Wiesenstraße 30
57271 Hilchenbach

Phone : +49 2733 29 2739
Fax : +49 2733 29 772739

SMSgroup Böttner, Detlef

Detlef Böttner

SMS group GmbH
Head of Sales Electrics/Automation Cold Rolling Mills
Wiesenstrasse 30
57271 Hilchenbach

Phone : +49 2733 29 1257
Fax : +49 2733 29 771257