China, Handan City, Hebei Province30. Apr 2024

Relocation and modernization of 3,500 mm heavy plate mill

The 3.5-m heavy plate mill of our customer Handan Iron & Steel went online in 2006. After a major modernization in 2014, which already improved the plant in terms of product quality and product portfolio, Handan decided in 2021 to relocate the plant. In line with that relocation, the customer assigned us with upgrading the plant even further and integrating an additional millstand into our X-Pact® automation system.

Continuous modernization  

This project really shows that a plant is always a living system. After having built the plant in 2006 Handan already seven years later decided to revamp the plant.

Major tasks of 2014´s modernization

We were assigned with the job, modernized major parts, and equipped it with components that are more powerful. We were able to meet customer requirements and improved the product quality in terms of flatness, edge quality and geometry. Also we extended the product portfolio, the plant was able to produce.

Conversion of the finishing stand
  • New hydraulic adjusting systems for closest thickness tolerances
  • New work-roll bending systems
  • 3-point thickness and profile gage with integrated width measuring function
  • Two roller tables to raise the production capacity during thermomechanical rolling.
  • Update of level 1 and level 2 automation including X-Pact® Pass Schedule Calculation (PSC®) and Profile and Flatness Control (PCFC®)
New combined spray and laminar cooling system

Replacement of the existing equipment by a system which combines spray cooling and laminar cooling.

New pre-leveler

The existing hot-plate leveler was relocated to the upstream side of the new plate cooling system. Serving as a pre-leveler, it removes flatness defects which may impair uniform plate cooling.

Hot-plate leveler for better flatness

The hot-plate leveler will be of the 9-roll design to handle plates in thicknesses of 8 to 100 mm. The optimal leveling strategy for each plate wascalculated by our X-Pact® leveling model on the basis of the material properties and the plate geometry.

New double-side trimming shear for higher throughput

New double-side trimmer operating to the rolling-cut principle. This cutting mode ensures extremely precise cuts and good edge quality. The new shear will be designed to perform up to 30 cuts/min.

Moving to a new location

After another seven years of successful operation Handan decided to relocate the plant to another location due to sustainability reasons. Again it was on us to get the job done. During the project, the customer not only decided to relocate the plant. Additionally, Handan supplied another millstand which had to be included into the X-Pact® process automation.

We brought the level 1 and level 2 X-Pact® automation system, up to a latest state of the art level and successfully integrated the additional millstand into all systems.  After only 6 weeks the plant was back online and  the head of the HBIS plate mill, Bu Kai, praised the SMS group project team:

The current adaptation of the production line configuration from one 4-high millstand to two 4-high millstands meant that the customer's annual production was doubled to two million tons.

The contractually requested delivery time for the electrical components of only eight months was met in spite of the global hardware shortage problem. The general commissioning was successfully completed in a record time of six weeks until the first plate was produced.

It was only thanks to the close and collaborative partnership between all parties involved that the project could be implemented in full and on schedule within the specified time frame.

The fast ramp-up of the entire mill was already clear when the first three plates rolled were of marketable quality. The customer was very satisfied with the plant performance and consequently issued the FAC on 30 April 2024.

An outstanding team from SMS group's Electrics and Automation unit supported us in this relocation project and fought hard to achieve a jointly successful outcome.

Impressions

four-high mill stand
The multi-plate rolling process controlled by an intelligent automation system and material tracking system
Combined spray & laminar cooling system
Control station of the hot-plate leveler
Plate yard

Main data

Material

Mainly: Pipe and ship building steel

Plate thickness

8 – 80 mm

Plate width, rolled

1,500 – 3,200 mm

Plate width, trimmed

1,400 – 3,100 mm

Plate length, rolled

6,000 – 18,000 mm

Plate length, finished

2,500 – 16,000 mm

Rolling Modes

Multiple Plate Rolling

Capacity

2 m t/y (finished plates)

Let's get in touch!